Your Tasks & Order Deadlines

This is the list of key services and suppliers for the show.

To submit an order for a product or service, click on the order form link and fill out the information required.

In order to reduce the amount of unnecessary contract with others onsite please ensure you place your orders in advance of build.

Supplier

Immersive AV    

Proj-X

LTD Associates

BE Furniture

Thorns

Pertons

ExCeL

ExCeL

Gainsborough

Ops Squad Stand Plan Team

ExCeL

ExCeL

RX Global

Bond Associates

ExCeL

Early Bird

1st September 2022    

N/A  

2nd September 2022

N/A  

11th August 2022    

N/A  

22nd August 2022

22nd August 2022

N/A

N/A

22nd August 2022

22nd August 2022

N/A

N/A

22nd August 2022

Deadline

16th September 2022    

26th August 2022    

2nd September 2022

N/A  

16th September 2022    

2nd September 2022    

N/A

N/A

N/A

8th August 2022  

N/A

N/A

5th September 2022

ASAP

N/A

Operational Documents & Order Forms

Please click here to view a full list of operational documents and order forms for your reference. 

Supplier A-Z

This is a comprehensive list of Official Suppliers of EGX London. If you do not see a supplier's name in this list when you receive correspondence then you are not ordering from a Official Suppliers. Please consult the list below or contact the operations team if you are in any doubt. 

AUDIO VISUAL

Immersive AV

Contact: Chloe Retter

Tel: +44 (0)77 5192 3785

Email: chloe.retter@immersiveav.com
Web : www.immersiveav.com

CATERING

ExCeL London

Contact: Gabija Simonaviciute

Tel: +44 (0) 207 069 4400

Email : gabija.simonaviciute@excelhospitality.london
Web:  https://excellondonhospitality.exhibitorcatering.co.uk/

CLEANING & WASTE

ExCeL London

Contact: ExCeL Exhibitor Services

Tel: +44 (0)20 7069 4400

Email: exhibitororders@excel.london
Web : www.excel.london/webshop

ELECTRICAL CONTRACTOR

Proj-X

Contact: Andy Charlton    

Tel: +44 (0) 1737 652207

Email: info@proj-x.org.uk
Web: www.proj-x.org.uk

FLOORCOVERING / CARPET

 

* Contact details to be completed  soon *

FURNITURE

BE Furniture

Contact: Ant Hart

Tel: +44 (0) 1664 812627

Email: ant@beeventhire.co.uk
Web : www.beeventhire.co.uk

FURNITURE

Thorns Group

Contact: Tanya Kelly

Tel: +44(0)20 8801 4444

Email: Tanya@thorns.co.uk
Web: EGX - Thorns Group

GRAPHICS & SIGNAGE

Pertons

Contact: Mark Perton

Tel: +44 (0) 20 8992 5775

Email: mark@pertonsigns.co.uk
Web:  pertonsigns.com

INTERNET & COMMUNICATIONS

ExCeL London

Contact: ExCeL Exhibitor Services

Tel: +44 (0)20 7069 4400

Email: exhibitororders@excel.london
Web : www.excel.london/webshop

LIFTING & HANDLING

LTD Associates

Contact: Dominic Bennett/Alison Bennett

Tel: +44 (0) 7799 606262/ +44 (0) 7887 841596
Email: dom@l-t-d.co.uk / alison@l-t-d.co.uk

PROMOTIONAL STAFF

Bond Associates

Tel: +44 (0)3 4513 04548

Email: info@bondassociates.co.uk

RIGGING

ExCeL London

Contact: ExCeL Exhibitor Services

Tel: +44 (0)20 7069 4400

Email: exhibitororders@excel.london
Web : www.excel.london/webshop

SHELL SCHEME

RX Global

Tel: +44 (0) 208 271 2137

Email: egx.operations@rxglobal.com

SECURITY

Gainsborough Events Management Limited

Contact: Kevin Bard

Tel: +44 (0)7818824452
Email: Kevin@gainsevents.com
Web: www.gainsevents.com

WARNING: Unsolicited Marketing Communications

It has come to our attention that our customers are increasingly being targeted by companies claiming to supply exhibitor/visitor/participant lists and details relating to our events and products at a cost.  Be vigilant – this data is likely fraudulent.  If you receive any such unsolicited offers, please do not respond unless you have checked with us first.

EGX and RX Global does NOT sell or pass your data to any third party without your permission.

Logistics: Traffic, Deliveries, Lifting & Storage

Please click here to view full information regarding Logistics (traffic, deliveries, lifting & storage).

Trading Standards

Polite Notice & Reminder for all Exhibitors attending EGX London September 2022

In order to continue to help the Show thrive and grow, we are taking this opportunity to remind you of the following rules and regulations, which are to be read and complied with by you in conjunction with the terms and conditions of the Dealer or Exhibitor Agreement you have entered into with us:

  • IT IS ILLEGAL TO TRY TO SELL ANY COUNTERFEIT PRODUCTS – be sure to have with you or close to hand any and all documentation (i) showing that the good or products you have on display have all the requisite health and safety approvals, notices of provenance, required list of ingredients or consumer warnings; and (ii) proving that you have the right, licence, authority or permission from the copyright owner or their representative/franchisee to offer for sale the goods and products;
 
  • IT IS COPYRIGHT INFRINGEMENT AND USUALLY A CRIMINAL OFFENCE to copy someone else’s work or part of it and pass it off as your own product or artwork and attempt to sell it. Please refrain from such activities. Companies and brands such as Disney, Marvel, Microsoft and Sony are represented at this Show.
 
  • TRADING STANDARDS OFFICERS from the Council will be present at the Show and have strict orders to demand that counterfeit products or goods are removed from stalls or stands and, in serious cases, to close down stalls and stands, without any liability to EGX Expo Limited.
 
  • WE ENCOURAGE WHISTLE BLOWERS – if you see anything suspicious on another stall or stand, please do not approach that stall-holder, but please be sure to pass on your concerns to the Information Office or any EGX Staff you see, so that we can pass them on to Trading Standards or the Venue or the Event Manager.

Health & Safety

Overview - It is very important that you read this section

We appreciate that some of you may have limited experience with regards to the legal and practical aspects of health and safety management. This section is designed to give you sufficient guidance to discharge your responsibilities. Guidance, however, can only go so far and you have a legal duty to ensure that your operations do not compromise health and safety. Failing to do so can lead to prosecution and other legal sanctions. If you are unsure you are urged to contact the Operations Manager. Please do not leave health and safety issues to the last minute, the earlier we have your information the better the support we can give you.

If you would like to view the safety site rules with regards to safe working then please refer to the Exhibitor Portal. A copy of the venue emergency procedures can be found in the below section.

Every stand contractor must ensure that they have identified any risks with working onsite and what control measures they will put in place to protect both your workers and others from COVID-19; e.g. wearing masks, cleaning & hygiene, staff procedures. These measures should be clearly displayed in your COVID-19 H&S Documentation including your Risk Assessment. 

Every exhibitor is responsible for making sensible adjustments to their space and onsite activities to ensure we maintain a safe environment across the show for everyone who is onsite during build up, show open and breakdown. All exhibitors must complete a COVID-19 risk assessment.

Policy Statement

RX Global aims to set the benchmark standard for managing health and safety in exhibitions. This is not only our moral and legal duty, but it is commercially important for the success of every event. We recognise that our exhibitors rely on us to provide a trading environment on the exhibition floor that is safe and without risks to health. We also recognise that running a public event places a special responsibility on RX Global and extends our duty of care not only to our staff but also to exhibitors, contractors, venue staff and visitors. The Exhibition Director is ultimately responsible for health and safety at the Show. To ensure that all RX Global health and safety obligations are met, the Exhibition Director supported by the operations team will: 

  • Allocate sufficient resources to meet health and safety objectives
  • Provide adequate control of health and safety risks arising from our work activities 
  • Consult with the venue, exhibitors and contractors on matters affecting health and safety 
  • Provide relevant health and safety information to employees and others 
  • Ensure all employees are competent to do their tasks particularly with regard to health and safety training 
  • Ensure so far as is reasonable that the contractors we engage for the show are competent

So far as is reasonably practicable prevent accidents and cases of work related ill health and maintain safe and healthy working conditions. 

Risk Assessment

RX Global has carried out suitable and sufficient assessment of the risks associated with this event, details of which can be obtained from the organiser’s office if you so require. However, general risks associated with any exhibition are as follows: 

  • Multiple contractors working in a single workplace
  • Fall from working at heights and working on a live edge
  • Objects falling from height or loads falling from vehicles
  • Impact injury from moving vehicles
  • Structural collapse of seating or an exhibition stand
  • Outbreak of legionnaires disease from a water feature
  • Food poisoning incident from temporary catering outlet
  • Fire
  • Major incident and civil emergency
  • Excessive working hours

This is an overview and by no means a comprehensive account of the risks involved at this event. It is the absolute duty of all parties to ensure that under the Management of Health and Safety at Work Regulations and other legislation suitable and sufficient risk assessments are conducted on all significant risks. The Management Regulations and associated guidance also requires that risks should be mitigated with a view to achieve maximum reduction in the level of risk within the bounds of what is reasonably practicable. In general terms, emphasis should always be placed on eliminating or reducing risk at source. It must be remembered that personal protective equipment is usually a control of last resort. 

There is a template available for your convenience that you can download here

There’s also extra reading material from the HSE website in the form of the A brief Guide to Controlling Risk in a Workplace, please click here.

Exhibitors' and Contractors' Legal Duties

As an exhibitor or contractor you have a legal duty of care for the safety of anyone who may be affected by your activities. You are ultimately responsible for all aspects of safety on your stand or work area during the build-up, the open period of the show and during the break down. Where exhibitors contract out the building and finishing of stands you are still vicariously responsible for the activities of your contractors. You can discharge your duties by ensuring that you do the following:

  • Appoint a competent person to be responsible for health and safety on site.
  • You MUST carry out suitable and sufficient risk assessment of all your activities and obtain relevant risk assessments from your contractors or sub-contractors. Exhibitors must obtain supporting method statements for the building and demounting of your stand. If you have a shell scheme stand the organiser has obtained the shell scheme contractor’s risk assessment on your behalf.
  • All exhibitors must also complete a COVID-19 Risk Assessment.
  • Ensuring that your staff and sub contractors’ staff working on site are informed of the site rules and health and safety arrangements which are detailed below and you must ensure so far as you reasonably can that they follow them.
  • Ensuring that all your staff, contractors’ and sub contractors’ staff are familiar with the venue’s emergency procedures which can be found via the Exhibitor Portal.

Stand Designer's Legal Duties

Stand designers have a legal duty to ensure that the stands are designed to be fit for the purpose intended, structurally sound and safe to build, use and demount without any undue risks.

Items to be submitted to RX Global by Exhibitors, Exhibitor Contractors’ and Organiser Contractors:

  • Name and contact details (including out of office telephone details) of the nominated health and safety representative on site.
  • A suitable and sufficient risk assessment covering all hazards involved in the build and dismantling of the stand (not required for shell scheme stands).
  • A copy of a method statement confirming the nominated health and safety representative on site plus a description of how the stand will be constructed and dismantled (not required for shell scheme stands).
  • Your risk assessment, method statement and construction and dismantle phase plan must also demonstrate how you will implement COVID-19 safety measures during build and breakdown. In order to review physical distancing, you must also be able to show distancing between furniture and other fixed elements of your stand.
  • A copy of your stand plans, including height dimensions, any rigged items, construction and material details (not required for shell scheme stands).
  • Notification and supporting risk assessments for any activity on your stand that represents a significant risk. This includes but is not limited to the following:

· Flammable substances or naked flame

· Pressurised gases such as LPG

· Hazardous chemicals and substances

· Ionising radiation

· Water features

· Demonstrations

· Visitor treatments - e.g. massage

Please note that all H&S documentation must be specific to the show and specific to the work activities performed by the contractor and clearly state the stand number and client name it refers to.

The method statement must include a name and mobile number of the person responsible for the management of the stand during the build and dismantling periods.

*For companies outside of the UK, please refer to the following EU Directives:

EU Framework Directive 89/391, EU Workplace 89/654, EU Workplace Equipment Directive 89/655, EU Personal Protective Equipment Directive 89/656, EU Manual Handling of Heavy Loads Directive 20/269 and EU Display Screen Equipment Directive 90/270.

CDM Regulations 

In preparation for the exhibition we would like to make you aware of UK law that is compulsory for all events in the UK. In April 2015 the Construction (Design and Management) Regulations were revised and now apply to all 'construction' activities in the UK including all those at the event build up and breakdown periods of exhibitions. The result is that you now need to be aware of and deliver your duties as laid out within the regulations for the construction and dismantling of your exhibition stand.

For more information on CDM please refer to the documents and templates that can be downloaded via the Exhibitor Portal.

As part of these regulations it is compulsory for space only stands to complete and submit a Construction and Dismantle Phase Plan. Please refer to the Exhibitor Portal for a template that can be used by the stand designer or contractor."

Personal Protective Equipment

If you are working onsite during the build-up and breakdown periods of EGX London you will be expected to wear appropriate Personal Protective Equipment for the work you are undertaking. You will be checked by security as you enter the building to ensure you have a high viability vest, suitable footwear (no opened toed shoes or heels) and while working you will also be monitored to ensure you are using the correct safety equipment i.e. Goggles, gloves etc.